Knowble Scientific
Lab Equipment Service and Sales
0
CO2Incubator+-+Gen.jpg

Incubators

General Incubators, Benchtop Incubators, CO2 Incubators and Tri-gas Incubators

myTemp 65HC Incubator

H2265 myTemp 65HC Main HR EM ARROW.jpg
H2265 myTemp 65HC Internal Inset HR EM.jpg
H2265 myTemp 65HC Main HR EM REV.jpg
H2300-SH.jpg
H2265 myTemp 65HC Main HR EM ARROW.jpg
H2265 myTemp 65HC Internal Inset HR EM.jpg
H2265 myTemp 65HC Main HR EM REV.jpg
H2300-SH.jpg

myTemp 65HC Incubator

from $123.60

Key Attributes:

  • Accurate temperature control from 0° to 60°C

  • Powerful compressor maintains 0°C

  • Stainless-steel internal chamber

  • Internal power outlet for shaker, mixers, etc.

  • For floor standing use or on bench-tops less than 32″ tall

  • Ideal for BOD and Drosophila applications

Accessories:
Quantity:
Add To Cart

Specifications

  • Temperature Range: 0°C to 60°C (RT-25°C to 60°C)

  • Temperature Accuracy: 0.5°C (at 37°C)

  • Temperature Uniformity: +/- 1.0°C (at 37°C)

  • Temperature Increments: 0.1°C

  • Dimensions:

    • Exterior: 21.25 x 21 x 39.35 in. / 54 x 53.34 x 99.85 cm

    • Interior: 15.75 x 12.75 x 19.75 in. / 40 x 32.4 x 50.2 cm

  • Capacity: 65L, (2.3 cu. ft.)

  • Capacity of BOD bottles: 30 bottles (300ml)

  • Weight: 117 lbs / 53 kg

  • Refrigerant: R134A

  • Electrical: 120, 60HZ or 230V, 50Hz (385W)

  • Warranty: 2 Years

  • Operating Temp. Range: +10 to +30°C

The myTemp 65HC Incubator is designed to provide accurate and uniform temperature control from 0 to 60°C. The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications.

A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc.

With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature..

With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32in/81cm). The instrument is supplied with two, adjustable height shelves, while additional shelves can also be purchased separately (item: H2365-SH).